12 research outputs found

    Cognitive approaches and optical multispectral data for semi-automated classification of landforms in a rugged mountainous area

    Get PDF
    This paper introduces a new open source, knowledge-based framework for automatic interpretation of remote sensing images, called InterIMAGE. This framework owns a flexible modular architecture, in which image processing operators can be associated to both root and leaf nodes of the semantic network, which constitutes a differential strategy in comparison to other object-based image analysis platforms currently available. The architecture, main features as well as an overview on the interpretation strategy implemented in InterIMAGE is presented. The paper also reports an experiment on the classification of landforms. Different geomorphometric and textural attributes obtained from ASTER/Terra images were combined with fuzzy logic and drove the interpretation semantic network. Object-based statistical agreement indices, estimated from a comparison between the classified scene and a reference map, were used to assess the classification accuracy. The InterIMAGE interpretation strategy yielded a classification result with strong agreement and proved to be effective for the extraction of landforms

    Constraints on spin-0 dark matter mediators and invisible Higgs decays using ATLAS 13 TeV pp collision data with two top quarks and missing transverse momentum in the final state

    Get PDF
    This paper presents a statistical combination of searches targeting final states with two top quarks and invisible particles, characterised by the presence of zero, one or two leptons, at least one jet originating from a b-quark and missing transverse momentum. The analyses are searches for phenomena beyond the Standard Model consistent with the direct production of dark matter in pp collisions at the LHC, using 139 fb−1 of data collected with the ATLAS detector at a centre-of-mass energy of 13 TeV. The results are interpreted in terms of simplified dark matter models with a spin-0 scalar or pseudoscalar mediator particle. In addition, the results are interpreted in terms of upper limits on the Higgs boson invisible branching ratio, where the Higgs boson is produced according to the Standard Model in association with a pair of top quarks. For scalar (pseudoscalar) dark matter models, with all couplings set to unity, the statistical combination extends the mass range excluded by the best of the individual channels by 50 (25) GeV, excluding mediator masses up to 370 GeV. In addition, the statistical combination improves the expected coupling exclusion reach by 14% (24%), assuming a scalar (pseudoscalar) mediator mass of 10 GeV. An upper limit on the Higgs boson invisible branching ratio of 0.38 (0.30+0.13−0.09) is observed (expected) at 95% confidence level

    Search for doubly charged Higgs boson production in multi-lepton final states using 139 fb−1 of proton–proton collisions at s√ = 13 TeV with the ATLAS detector

    Get PDF
    A search for pair production of doubly charged Higgs bosons (H±± ), each decaying into a pair of prompt, isolated, and highly energetic leptons with the same electric charge, is presented. The search uses a proton–proton collision data sample at a centre-of-mass energy of 13 TeV corresponding to an integrated luminosity of 139 fb−1 recorded by the ATLAS detector during Run 2 of the Large Hadron Collider (LHC). This analysis focuses on same-charge leptonic decays, H±±→ℓ±ℓ′± where ℓ,ℓ′=e,μ,τ, in two-, three-, and four-lepton channels, but only considers final states which include electrons or muons. No evidence of a signal is observed. Corresponding upper limits on the production cross-section of a doubly charged Higgs boson are derived, as a function of its mass m(H±±), at 95% confidence level. Assuming that the branching ratios to each of the possible leptonic final states are equal, B(H±±→e±e±)=B(H±±→e±μ±)=B(H±±→μ±μ±)=B(H±±→e±τ±)=B(H±±→μ±τ±)=B(H±±→τ±τ±)=1/6, the observed (expected) lower limit on the mass of a doubly charged Higgs boson is 1080 GeV (1065 GeV) within the left-right symmetric type-II seesaw model, which is the strongest limit to date produced by the ATLAS Collaboration. Additionally, this paper provides the first direct test of the Zee–Babu neutrino mass model at the LHC, yielding an observed (expected) lower limit of m(H±±) = 900 GeV (880 GeV)

    Search for heavy Majorana or Dirac neutrinos and right-handed W gauge bosons in final states with charged leptons and jets in pp collisions at √s = 13 TeV with the ATLAS detector

    Get PDF
    A search for heavy right-handed Majorana or Dirac neutrinos NR and heavy right-handed gauge bosons WR is performed in events with energetic electrons or muons, with the same or opposite electric charge, and energetic jets. The search is carried out separately for topologies of clearly separated final-state products (“resolved” channel) and topologies with boosted final states with hadronic and/or leptonic products partially overlapping and reconstructed as a large-radius jet (“boosted” channel). The events are selected from pp collision data at the LHC with an integrated luminosity of 139 fb−1 collected by the ATLAS detector at √s = 13 TeV. No significant deviations from the Standard Model predictions are observed. The results are interpreted within the theoretical framework of a left-right symmetric model, and lower limits are set on masses in the heavy righthanded WR boson and NR plane. The excluded region extends to about m(WR) = 6.4 TeV for both Majorana and Dirac NR neutrinos at m(NR) < 1 TeV. NR with masses of less than 3.5 (3.6) TeV are excluded in the electron (muon) channel at m(WR) = 4.8 TeV for the Majorana neutrinos, and limits of m(NR) up to 3.6 TeV for m(WR) = 5.2 (5.0) TeV in the electron (muon) channel are set for the Dirac neutrinos. These constitute the most stringent exclusion limits to date for the model considered

    Observation of four-top-quark production in the multilepton final state with the ATLAS detector

    Get PDF
    This paper presents the observation of four-top-quark (tt¯tt¯) production in proton-proton collisions at the LHC. The analysis is performed using an integrated luminosity of 140 fb−1 at a centre-of-mass energy of 13 TeV collected using the ATLAS detector. Events containing two leptons with the same electric charge or at least three leptons (electrons or muons) are selected. Event kinematics are used to separate signal from background through a multivariate discriminant, and dedicated control regions are used to constrain the dominant backgrounds. The observed (expected) significance of the measured tt¯tt¯ signal with respect to the standard model (SM) background-only hypothesis is 6.1 (4.3) standard deviations. The tt¯tt¯ production cross section is measured to be 22.5+6.6−5.5 fb, consistent with the SM prediction of 12.0±2.4 fb within 1.8 standard deviations. Data are also used to set limits on the three-top-quark production cross section, being an irreducible background not measured previously, and to constrain the top-Higgs Yukawa coupling and effective field theory operator coefficients that affect tt¯tt¯ production

    Mid-term results of EVAR in severe proximal aneurysm neck angulation

    Get PDF
    Objective To determine if mid-term outcome following endovascular aneurysm repair (EVAR) with the Endurant Stent Graft (Medtronic, Santa Rosa, CA, USA) is influenced by severe proximal neck angulation. Methods A retrospective case-control study was performed using data from a prospective multicenter database. All measurements were obtained using dedicated reconstruction software and center-lumen line reconstruction. Patients with neck length >15 mm, infrarenal angle (β) >75°, and/or suprarenal angle (α) >60°, or neck length >10 mm with β >60°, and/or α >45° were compared with a matched control group. Primary endpoint was primary clinical success. Secondary endpoints were freedom from rupture, type 1A endoleak, stent fractures, freedom from neck-related reinterventions, and aneurysm-related adverse events. Morphological neck variation over time was also assessed. Results Forty-five patients were included in the study group and were compared with a matched control group with 65 patients. Median follow-up time was 49.5 months (range 30.5-58.4). The 4-year primary clinical success estimates were 83% and 80% for the angulated and nonangulated groups (p =.42). Proximal neck angulation did not affect primary clinical success in a multivariate model (hazard ratio 1.56, 95% confidence interval 0.55-4.41). Groups did not differ significantly in regard to freedom from rupture (p =.79), freedom from type 1A endoleak (p =.79), freedom from neck-related adverse events (p =.68), and neck-related reinterventions (p =.68). Neck angle reduction was more pronounced in patients with severe proximal neck angulation (mean Δα -15.6°, mean Δβ -30.6°) than in the control group (mean Δα -0.39°, mean Δβ -5.9°) (p <.001). Conclusion Mid-term outcomes following EVAR with the Endurant Stent Graft were not influenced by severe proximal neck angulation in our population. Despite the conformability of the device, moderate aortic neck remodeling was identified in the group of patients with angulated neck anatomy on the first computed tomography scan after implantation with no important further remodeling afterwards. No device integrity failures were encountered

    Modelagem da recomendação de corretivos e fertilizantes para a cultura da soja Modeling lime and fertilizer recommendations for soybean

    Get PDF
    A recomendação de adubação para as culturas agrícolas, no Brasil, é feita com base em tabelas que relacionam a classe de disponibilidade do nutriente no solo com a dose a ser aplicada. Este trabalho apresenta uma alternativa para recomendar corretivos e fertilizantes para a cultura da soja, o SIRSo (sistema de recomendação de corretivos e fertilizantes para a cultura da soja). O princípio desse sistema é o balanço nutricional, ou seja, a recomendação se faz a partir da diferença entre o requerimento de nutrientes pela planta e o suprimento de nutrientes pelo solo, por resíduos orgânicos, por fertilizantes e pela calagem. O sistema considera ainda o fator sustentabilidade, visando manter uma quantidade de nutriente no solo capaz de garantir produtividade mínima em cultivos subseqüentes. Para recomendar calagem, o sistema considera dois métodos: a neutralização do Al3+ e a elevação dos teores de Ca2+ + Mg2+, ou a saturação por bases. O requerimento de nutrientes varia com a produtividade esperada de grãos, com as características do solo e com a taxa de recuperação pela planta do nutriente aplicado ao solo. O suprimento pelo solo depende da disponibilidade do nutriente, estimada a partir da análise de solo e da taxa de recuperação pelo extrator do nutriente aplicado. As comparações entre as recomendações geradas pelo SIRSo e aquelas oriundas das tabelas em uso no País mostram, em geral, que o SIRSo recomenda maior quantidade de nutrientes, principalmente de P e K quando consideradas as maiores produtividades, fato confirmado pela análise de sensibilidade, que mostrou grande variação da dose a ser recomendada desses nutrientes com a produtividade de grãos. Esse fato pode ser considerado como vantagem do SIRSo em relação às tabelas, muitas das quais apresentam pouca ou nenhuma variabilidade das doses em relação à produtividade.<br>Fertilizer recommendations for agricultural crops in Brazil are based on tables that relate indexes of nutrient availability in the soil with the required dose of the nutrient. This study presents an alternative for lime and fertilizer recommendations for soybean, called SIRSo. This lime and fertilizer recommendation system for soybean considers the nutritional balance, i.e., recommendations are based on the difference between plant nutrient requirement and the nutrient supply from the soil through organic residues, fertilizers and liming. The system further takes a sustainability factor into consideration, aiming at the maintenance of soil nutrient levels that ensure a desired minimum yield in subsequent cultivations. The system considers two methods for liming recommendations: Al3+ neutralization and increased Ca2+ + Mg2+ contents or base saturation. Nutrient requirements vary according to the expected grain yield, the soil characteristics and plant recovery rate of the nutrient applied to the soil. The soil supply depends on the estimated nutrient availability based on the soil analysis, and on the recovery rate of the applied nutrient by the extractor. Comparisons of SIRSo-based recommendations with those of the tables used nationwide show that SIRSo generally recommends higher nutrient quantities, mainly for P and K, when the highest yields are considered. This fact was confirmed by the sensitivity analysis, which detected wide variation of the recommended dose for these nutrients according to the grain yield. This fact is considered an advantage of SIRSo over the tables, where recommendations of doses according to the yield are little or not adjustable at all
    corecore